RH17/RH37 RH18/RH38(スプリング付き)
高耐圧PTFEストレートホース
High pressure PTFE straight hose
- HOME
- PRODUCT
- フッ素樹脂ホース・フレキ・ベローズ
- 加締め継手タイプ(接液:金属・フッ素樹脂)
- 高耐圧PTFEストレートホース
内側の平滑性と耐圧性を両立。
プロセスで欠かせない高温・高圧送液を可能に。
SUS硬線ブレードで外装を補強し強度を確保することで、圧力や温度による内面PTFEの変形を最小限に抑えることが可能です。
ゴムホースの上位互換品としての役割を担い、幅広い分野への応用が利くため、油圧機械や加硫成型機、塗装ブースなど多方面に多くの納入実績を誇ります。
用途Usages
様々な薬液の移送・酸・アルカリ、高粘度製品などでのご使用をお勧めいたします。
It is recommended to use various chemical liquid transfer, acid, alkali, high viscosity product etc...
ポイントPoint
洗浄性
内面平滑性を高めることで、送液・メンテナンス時の利便性が圧倒的に向上しました。
高耐圧性
硬線ブレードの剛性を活かし、1重ブレードで高圧まで対応します。
オプションOption
ホース:導電性 R<10⁶Ω~10⁹Ω(RH37/RH38)
Hose: Conductivity R<10⁶Ω~10⁹Ω(RH37/RH38)
補強:スプリングは全周または首元が選択可能(RH18/RH38)
Reinforcement: Spring all around or partly(RH18/RH38)
- 注意
- 本製品は静止状態でご使用ください。※RH17/RH37は外装スプリングなし、RH18/RH38は外装スプリングありとなります。
- Notice
- Please use this product in a stationary state. *RH17/RH37 does not have exterior spring. RH18/RH38 has exterior spring.
適合規格Conformed standards
食品衛生法
ISO12086
仕様Specification
継手Fitting

レバーカップリングタイプ
Lever Coupling type

フランジラップジョイントタイプ
Flange lap-joint type

オスネジタイプ
Male Screw type

メスネジタイプ
Female screw type

パイプSMコネクタータイプ
Pipe SM connector type

フェルールタイプ
Ferrule type
材質構成Material composition
注意・特記事項Caution / remarks
・各適合規格は全ての安全性を証明するものではありません。ご使用時には安全性の事前確認が必要です。
・ホースサイズと継手サイズは必ずしも一致するものではありません。適用可能な金具継手には別途お問い合わせください。
・各ホースの詳細寸法は代表的なものを抜粋した数値です。状況により使用するホースが異なる場合があります。
・継手形状や加工の影響、製造原料の変更など様々な要因により詳細データは予告なく変更することがございます。
・原則として加圧せず使用するための製品です。使用圧力※(数値)は、検証による実証値で保証値ではありません。
・変位・曲がりを含む外的な応力が発生するラインでは、外装スプリング補強のRH18/RH38をご使用ください。
※当ホームページ掲載の製品仕様やサイズ・各数値は代表的な弊社取り扱い製品における参考値です。
生産状況や材質の変更などにより、実際の製品とは異なる場合がございますので予めご了承ください。
・Any registration does not guarantee all safety. Please check your safety before using it. ・The hose size and fitting size do not always match. Please contact us for applicable fittings. ・The detailed dimensions of each hose are excerpts of typical ones. The hose used may differ depending on the situation. ・Detailed data of the hose used is subject to change without notice due to various factors such as the shape of the joint, the influence of processing, and changes in the manufacturing materials. ・In principle, this product is intended to be used without pressure,above ※(pressure) is a verified value and is not guaranteed value. - For lines where external stress including displacement and bending occurs, please use RH18/RH38 with external spring reinforcement. ※The product specifications, sizes, and values posted on this website are reference values for typical products handled by our company. Please note that the actual product may differ due to changes in production conditions and materials.
カタログダウンロード / お問い合せCatalog download / Contact Us
カタログダウンロードご希望の方
紙面カタログご希望の方/お問い合わせの方
右上のメールアイコンより下記フォームにてご連絡お願いいたします。