- HOME
- PRODUCT
- ゴムフレキ・可とう管
- ゴムフレキ
- ストレート型ゴムフレキ
軸直角方向の変位吸収に優れた
自由面間タイプ。
国土交通省仕様書適合品以外の仕様も選べるストレートタイプのゴムフレキ。内圧による変位が少なく、主に偏心方向への変位吸収を得意とします。
主な使用場所Main place to use
ポンプ・タンクそれぞれの入口・出口配管ラインなど。
Inlet and outlet line of pump and tank etc..
ポイントPoint
耐久性
EPDMが持つ耐久性を、合成繊維の積層構造によって、さらに高めました。
オプションOption
フランジ変更可
フランジの変更については技術資料『製品別フランジ規格適合表』をご参照ください。
- 注意
- ●20A~40Aは本体補強リングの代わりに補強コードを使用しています。●製作する面間によって、形状がAタイプまたはCタイプとなります。
- Notice
- ●For 20A-40A reinforcement cord is used instead of main body reinforcement ring. Depending on production length, the shape is A type or C type.
適合規格Conformed standards
国土交通省仕様書適合品
仕様Specification
接液部材質 : EPDM / 外装材質:EPDM / 主な適合流体:工業用水・純水・一般排水・冷温水・海水など
●赤い枠の製品は国土交通省仕様書適合製品です。●概算質量は、材質SS400 JIS10Kフランジの場合を示します。●取付時寸法許容値は許容変位量に含みます。(許容変位量=取付時変位量+稼働変位量)●複合変位が発生する場合の補正については技術資料の『複合変位発生時の補正変位量について』を参照してください。
●Products in red frame are in conformity to the Ministry of Land, Infrastructure and Transport specifications. ●The estimated weight shows the case of SS400 JIS10K flange. ●Installation tolerances are included in allowable displacement. (Allowable displacement = Displacement at installation + Displacement in operation) ●Please refer to technical data "About the correction when composite displacement occurs".
材質構成Material composition
※当ホームページ掲載の製品仕様やサイズ・各数値は代表的な弊社取り扱い製品における参考値です。生産状況や材質の変更などにより、実際の製品とは異なる場合がございますので予めご了承ください。
※The product specifications, sizes, and values posted on this website are reference values for typical products handled by our company. Please note that the actual product may differ due to changes in production conditions and materials.