TH20(格子ブレード) TH21(スパイラルブレード)

シリコーンブレードホース

Silicone braid hose

高い視認性に加え、柔軟で高耐久な汎用シリコーンホース。

透明度の高いシリコーン材の中間層に、耐熱性合成繊維を入れ込むことで、柔軟性や耐久性も同時に確保。
付加架橋式成型で分解生成物を残さず、臭い移りを極限まで抑えました。
TH21は、糸抜けパンクのリスク対策として中間層にスパイラルブレードを採用。
様々なプロセスで使える汎用ホースの決定版です。

用途Usages

製薬、食品、飲料、化粧品、化成品などプロセス装置でのご使用をお勧めいたします。

It is recommended to use for pharmaceutical, foods, beverages, cosmetics, chemical.

ポイントPoint

視認性+強度

内外面に半透明シリコーンを使い、視認性を確保。中間層に耐熱性合成繊維を採用することで伸びや膨れを抑制します。

オプションOption

継手:バフ#400+電解研磨

Joint: buff#400+Electropolishing

継手:不働態化処理

Joint: Passivation

外装:SUSブレード

Exterior:SUS braid

注意
適合規格はすべての安全性を保障するものではありません。ご使用時には安全性の事前確認が必要です。スチーム洗浄は飽和水蒸気圧力0.2MPa(130℃)以下、短時間で行ってください。
Notice
Any registration does not guarantee all safety. Please check your safety before using it. For steam cleaning, apply for a short time with a saturated steam pressure ≦0.2MPa ≦130℃.

適合規格Conformed standards

食品衛生法

FDA DMF TypeⅡ No.25486(TH21のみ)

FDA 21CFR 170~199(TH21のみ)

FDA 21CFR 177.2600

USP ClassⅥ(TH21のみ)

仕様Specification

TH20(格子ブレード)

接液部材質 : シリコーン / 補強材 : 合成繊維 / 外装材質 : シリコーン / 使用温度範囲 : -30℃~150℃

TH21(スパイラルブレード)

接液部材質 : シリコーン / 補強材 : ポリエステル / 外装材質 : シリコーン / 使用温度範囲 : -30℃~150℃

継手Fitting

レバーカップリングタイプ

Lever Coupling type

フランジラップジョイントタイプ

Flange lap-joint type

オスネジタイプ

Male Screw type

メスネジタイプ

Female screw type

サニタリータイプ

Sanitary type

材質構成Material composition

・スチーム洗浄は飽和水蒸気圧力0.2MPa(130℃)以下、短時間で行ってください。
・補強ワイヤーがないため柔軟性が高いですが、曲げすぎると座屈してしまいますのでご注意ください。
・負圧吸引でご使用されるお客様は、TH33・TH34をご検討ください。
・各適合規格は全ての安全性を証明するものではありません。ご使用時には安全性の事前確認が必要です。
・ホースサイズと継手サイズは必ずしも一致するものではありません。適用可能な継手金具については別途お問い合わせください。
・6A、8Aは、ネジ継手のみ対応となります。

※当ホームページ掲載の製品仕様やサイズ・各数値は代表的な弊社取り扱い製品における参考値です。生産状況や材質の変更などにより、実際の製品とは異なる場合がございますので予めご了承ください。

For steam cleaning,apply for a short time with a saturated steam pressure ≦ 0.2MPa and ≦ 130℃ It is highly flexible because there is no reinforcing wire,but please note that it will buckle if it is bend too much. Customers using negative pressure suction should consider TH33 and TH34. Any registration does not guarantee all safety. Please check your safety before using it. The hose size and fitting size do not always match. Please contact us for applicable fittings. 6A and 8A are only compatible with screw fittings. ※The product specifications, sizes, and values posted on this website are reference values for typical products handled by our company. Please note that the actual product may differ due to changes in production conditions and materials.

カタログダウンロード/お問い合せCatalog download

紙面でのカタログご希望の方や、ご不明点のお問い合わせは、ページ下部の【お問い合わせ/カタログ請求】よりご依頼ください